Author Topic: Stuck sliding glass door  (Read 49237 times)

0 Members and 1 Guest are viewing this topic.

Offline Chuck

  • Raccoon
  • *****
  • Posts: 1276
Stuck sliding glass door
« on: Dec 05, 11, 01:12:02 PM »
We have a stuck sliding glass door that won't move from it's closed position.  Any suggestions on how to un-stick it?  The top wants to move but the bottom right won't budge.

Offline Bob C

  • Moderators
  • Raccoon
  • *
  • Posts: 974
Re: Stuck sliding glass door
« Reply #1 on: Dec 05, 11, 01:38:55 PM »
Move the little lever to the position that says "Unlock"? ;)

Seriously... could it be that the little wheels the thing moves on (either at the top and/or bottom) are frozen or out of alignment? When this has happened to me in the past, I was able to move it by lifting up on the door while trying to move the door

Online Wrightwood

  • Administrator
  • Raccoon
  • *****
  • Posts: Plenty of Posts!
  • Wildlife Gateway

Chesslike

  • Guest
Re: Stuck sliding glass door
« Reply #3 on: Dec 05, 11, 02:22:23 PM »
We have a stuck sliding glass door that won't move from it's closed position.  Any suggestions on how to un-stick it?  The top wants to move but the bottom right won't budge.

Sounds like your foundation has settled and will need some extensive repairs. That massive crack in the foundation that I saw under that sliding glass door is probably not helping at all. Better start looking at that sizable home equity loan.

Glad I could help,
Bob

Offline Mrs. Hillbilly

  • Raccoon
  • *****
  • Posts: 915
Re: Stuck sliding glass door
« Reply #4 on: Dec 06, 11, 12:09:03 AM »

Offline ChrisLynnet

  • Raccoon
  • *****
  • Posts: 1340
Re: Stuck sliding glass door
« Reply #5 on: Dec 06, 11, 06:51:12 AM »
LOL, that's great! Duct tape rules!  :2thumbsup:

Offline quadriders

  • Scrub Jay
  • ***
  • Posts: 240
Re: Stuck sliding glass door
« Reply #6 on: Dec 06, 11, 07:06:17 AM »
My husband is a door/glass guy, if you need his number send me a text.  Thanks

Hope its just bad wheels or something simple.

Offline Stitches

  • Raccoon
  • *****
  • Posts: 2918
Re: Stuck sliding glass door
« Reply #7 on: Dec 06, 11, 02:15:52 PM »
No Pac-Fan.   It think you've got it mixed up.   If it moves and shouldn't, it's duct tape.   Clearly, this is a case of 'if it doesn't move and should, it's WD40.


Offline Stitches

  • Raccoon
  • *****
  • Posts: 2918
Re: Stuck sliding glass door
« Reply #8 on: Dec 06, 11, 03:01:29 PM »
Oops.   I meant to type 'I' think you've got it mixed up.

Offline Mrs. Hillbilly

  • Raccoon
  • *****
  • Posts: 915
Re: Stuck sliding glass door
« Reply #9 on: Dec 06, 11, 04:32:02 PM »
Ha Ha!
Thanks for clearing that up for me Stitches!  ;D

Offline Chuck

  • Raccoon
  • *****
  • Posts: 1276
Re: Stuck sliding glass door
« Reply #10 on: Dec 10, 11, 08:11:05 AM »
Let's see, this weekend I already checked the wheels, so I need-

Check the foundation crack- thank you Bob
Get the Duct tape
Get some WD 40

I think instead I'll remove the locking mechanism and see if somehow it got stuck, then spray it with WD 40 and Duct tape the lock instead of using the screws I'm taking out.  That way it will be quicker next time. 

Or, just get a sledge hammer, break it into little pieces, then I can destroy the frame and gently remove it, then Kathysc will use the hammer on me, and buy a replacement slider with the life insurance she thinks she will get from my parting. 

kawasaki_girl

  • Guest
Re: Stuck sliding glass door
« Reply #11 on: Dec 10, 11, 02:02:34 PM »
good one, Chuck :)

Offline Chuck

  • Raccoon
  • *****
  • Posts: 1276
Re: Stuck sliding glass door
« Reply #12 on: Dec 10, 11, 05:03:54 PM »
Got the sledge hammer out, in clear view so the sliding door could see it.  Then we both used our joint force (about a half person's worth) to slide it, and it slid :2thumbsup: :2thumbsup:

Obviously the wheels must have been frozen.  We didn't someone suggest checking the wheels? ;D ;D  Wait, you did.  It just took some muscle from two sides.

Offline tcaarabians

  • Raccoon
  • *****
  • Posts: 1900
Re: Stuck sliding glass door
« Reply #13 on: Jan 25, 12, 09:32:47 AM »
Hope that sliding glass door is working great now. After a can or so of WD 40 on ours.. I decided it was time to have the wheels replaced. Hoss from Another Glass and Mirror (hope I got that right) came out and replaced the wheels for us. It was done lickety split at a very fair price and that puppy slides like no tomorrow. He also fixed other things for us .. and all at a very fair price. And, he took a pic of a six-foot or so gopher snake in our driveway and sent it to me. Now, that is service.
best, cheryl o7o

Offline Toolman

  • Raccoon
  • *****
  • Posts: 874
  • You can't fix stupid
Re: Stuck sliding glass door
« Reply #14 on: Jan 25, 12, 10:49:03 AM »
WD-40 has it's place and uses, short term rust preventive and short term lube. I've found it to gum up on things like sliding glass door wheels and door hinges. It will for for a quick fix though. My go to lube for many things are TRI-Flow teflon lubricants. If my pruning clippers get stickey I'll wire brush then use TRI-Flow spray at the pivot and it last's much longer than WD-40 ever will. I've been using TRI-Flow teflon lube on motorcycle and bicycle chains for years and it doesn't gum up or fly off as bad as other chain lubes. It can be used for needle and roller bearings such as found on roll up garage doors.

 It's a must have product for the do it yourselfer.

Offline Chuck

  • Raccoon
  • *****
  • Posts: 1276
Re: Stuck sliding glass door
« Reply #15 on: Jan 25, 12, 07:53:28 PM »
Toolman is right.  WD 40 forget it.  TriFlow is like a miracle product.  I started using this when a locksmith friend gave me a can.  He said many times he would be called out for lock issues and it took 10 seconds to fix with TriFlow.  Some locksmiths would still charge a full call charge.  We had issues a year ago at the old museum and community building.  I sprayed this on the locks and they are still working great.

Where do you buy yours Toolman?  I have only been able to get it through a locksmith.

Offline Toolman

  • Raccoon
  • *****
  • Posts: 874
  • You can't fix stupid
Re: Stuck sliding glass door
« Reply #16 on: Jan 26, 12, 07:00:05 AM »
Where do you buy yours Toolman?  I have only been able to get it through a locksmith.

 You could ask Mike at the Hardware store to stock it. He's pretty good about getting products on the shelf for his customers. When I place an order at Brownells I'll add a can or two. Brownells is a gunsmithing vendor. Do not use this on your weapons though ! it won't take the heat generated in them. I use Milletec for that. It was suggested to me by the armourer at the Sheriff Dept. and don't use anything but that now.

 Amazon also sells it. I haven't looked for it at Home Depot or Lowe's but they may carry it. BTW, I also use their teflon grease in wheel bearings and CV joints. When I was racing desert cars in the 80's that stuff was amazingly superior to any other grease we used.

 Yes you can use it in locks but I use a liquid graphite in our gate locks. It seems to work a tad better in the winter when they were freezing up. The rest of the year would be fine to use the Tri-Flow in locks or anything else needing lubrication.

 When we first got the house both garage doors had problems with the rollers. I grabbed my trusty can of Tri-Flow and it cleared them up. WD-40 didn't do anything. I now lubricate the roller tracks with the grease and squirt the roller bearings with Tri-Flow once a year and never have problems with the rollers on the garage doors.

 Search their website for retailers near you. http://www.triflowlubricants.com/  or Brownells  http://www.brownells.com/

 Not a fan of LPS products compared to Tri-FLow. I'll use LPS contact cleaner occasionally but that's about it.