Author Topic: No more Morse Code required for licenses  (Read 15887 times)

0 Members and 1 Guest are viewing this topic.

Offline spellbinder

  • Scrub Jay
  • ***
  • Posts: 182
No more Morse Code required for licenses
« on: Dec 16, 06, 06:55:48 PM »
This is from the ARRL web site :

End of an Era: FCC to Drop Morse Testing for All Amateur License Classes
NEWINGTON, CT, Dec 15, 2006 -- In an historic move, the FCC has acted to drop the Morse code requirement for all Amateur Radio license classes. The Commission today adopted, but hasn't yet released, the long-awaited Report and Order (R&O) in WT Docket 05-235, the "Morse code" proceeding. Also today, the FCC adopted an Order on Reconsideration in WT Docket 04-140 -- the "omnibus" proceeding -- modifying the Amateur Radio rules in response to an ARRL request to accommodate automatically controlled narrowband digital stations on 80 meters in the wake of rule changes that became effective today at 12:01 AM Eastern Time. The Commission said it will designate the 3585 to 3600 kHz frequency segment for such operations, although the segment will remain available for CW, RTTY and data as it has been. In a break from what's been the usual practice in Amateur Radio proceedings, the FCC only issued a public notice at or about the close of business today and not the actual Report & Order, so some details -- including the effective dates of the two orders -- remain uncertain. Currently, Amateur Radio applicants for General and higher class licenses have to pass a 5 WPM Morse code test to operate on HF. Today's R&O will eliminate that requirement all around.

"This change eliminates an unnecessary regulatory burden that may discourage current Amateur Radio operators from advancing their skills and participating more fully in the benefits of Amateur Radio," the FCC said. The ARRL had asked the FCC to retain the 5 WPM for Amateur Extra class applicants only. The FCC proposed earlier to drop the requirement across the board, however, and it held to that decision in today's R&O.

Perhaps more important, the FCC's action in WT Docket 05-235 appears to put all Technician licensees on an equal footing: Once the R&O goes into effect, holders of Technician class licenses will have equivalent HF privileges, whether or not they've passed the 5 WPM Element 1 Morse examination. The FCC said the R&O in the Morse code docket would eliminate a disparity in the operating privileges for the Technician and Technician Plus class licensees -- something the ARRL also has asked the Commission to correct following the release of its July 2005 Notice of Proposed Rule Making (NPRM) in WT Docket 05-235.

"With today's elimination of the Morse code exam requirements, the FCC concluded that the disparity between the operating privileges of Technician class licensees and Technician Plus class licensees should not be retained," the FCC said in its public notice. "Therefore, the FCC, in today's action, afforded Technician and Technician Plus licensees identical operating privileges."

Technician licensees without Element 1 credit (ie, Tech Plus licensees) currently have operating privileges on all amateur frequencies above 30 MHz. Tech Pluses or Technicians with Element 1 credit have limited HF privileges on 80, 40, 15 and 10 meters. Under the Part 97 rules the Commission proposed last year in its NPRM in WT Docket 05-235, current Technicians lacking Morse credit after the new rules went into effect would have had to upgrade to General to earn any HF privileges.

The wholesale elimination of a Morse code requirement for all license classes ends a longstanding national and international regulatory tradition in the requirements to gain access to Amateur Radio frequencies below 30 MHz. The first no-code license in the US was the Technician ticket, instituted in 1991. The question of whether or not to drop the Morse requirement altogether has been the subject of often-heated debate over the past several years, but the handwriting has been on the wall -- especially since the FCC instituted an across-the-board 5 WPM Morse requirement effective April 15, 2000, in the most-recent major Amateur Radio licensing restructuring (WT Docket 98-143).

The FCC said today's R&O in WT Docket 05-235 comports with revisions to the international Radio Regulations resulting from the International Telecommunication Union (ITU) World Radiocommunication Conference 2003 (WRC-03). At that gathering, delegates agreed to authorize each country to determine whether or not to require that applicants demonstrate Morse code proficiency in order to qualify for an Amateur Radio license with privileges on frequencies below 30 MHz.

The list of countries dropping the Morse requirement has been growing steadily since WRC-03. A number of countries, including Canada, the UK and several European nations, now no longer require applicants for an Amateur Radio license to pass a Morse code test to gain HF operating privileges. Following WRC-03, the FCC received several petitions for rule making asking it to eliminate the Morse requirement in the US.

Typically, the effective date of an FCC Order is 30 days after it appears in the Federal Register. If that's the case, the Morse requirement and the revised 80-meter segment for automatically controlled digital stations would likely not go into effect until late January or early February 2007. That's not clear from the public notice, however. The FCC can order its decision effective upon release.

The ARRL will provide any additional information on these important Part 97 rule revisions as it becomes available.




time to upgrade to my general...

Offline Wrightwood

  • Administrator
  • Raccoon
  • *****
  • Posts: Plenty of Posts!
  • Wildlife Gateway
Re: No more Morse Code required for licenses
« Reply #1 on: Dec 17, 06, 01:37:29 AM »
Wow... Thanks Scott

Clint - when's the next class?

Offline RobertW

  • Moderator
  • Raccoon
  • *****
  • Posts: Plenty of Posts!
  • Clear Skies!
Re: No more Morse Code required for licenses
« Reply #2 on: Dec 17, 06, 02:32:50 AM »
It's about time!  If it weren't for the code requirements 30 years ago, I would have already been a HAM for all those years.   ;D

Offline Moose

  • Bear
  • ****
  • Posts: 294
  • The Moose is Loose
Re: No more Morse Code required for licenses
« Reply #3 on: Dec 17, 06, 02:43:04 AM »
Yahoo!

KWBoy

  • Guest
Re: No more Morse Code required for licenses
« Reply #4 on: Dec 17, 06, 02:57:02 AM »
Yay.... When is the next class Clint? Let me know when or if you have another class.

Offline SNOW

  • Raccoon
  • *****
  • Posts: 505
Re: No more Morse Code required for licenses
« Reply #5 on: Dec 17, 06, 03:32:44 AM »
It's about time!  If it weren't for the code requirements 30 years ago, I would have already been a HAM for all those years.   ;D


Same with me. Wednesday of this week I finally succeeded in passing the dang code test and then on Friday the FCC decided to get rid of the requirement. Wish I had all of those practice hours back. Oh well, adversity builds frustration er I  mean character.

Chesslike

  • Guest
Re: No more Morse Code required for licenses
« Reply #6 on: Dec 17, 06, 03:37:27 AM »
Snow, now you know how right that character Murphy was. You passing the code test is probably why they got rid of it, kinda like washing your car causing it to rain. ;D Congratulations to you though. :thumbs: :thumbs:

Offline Wrightwood

  • Administrator
  • Raccoon
  • *****
  • Posts: Plenty of Posts!
  • Wildlife Gateway
Re: No more Morse Code required for licenses
« Reply #7 on: Dec 17, 06, 03:53:50 AM »
Jack.... Thanks for making this happen  :D

Quote
Same with me. Wednesday of this week I finally succeeded in passing the dang code test and then on Friday the FCC decided to get rid of the requirement. Wish I had all of those practice hours back. Oh well, adversity builds frustration er I  mean character.

tiltronix

  • Guest
Re: No more Morse Code required for licenses
« Reply #8 on: Dec 17, 06, 02:48:45 PM »
Back in 1955, I passed the General Morse Code requirements with 61 correct received "words."  60 were required!  Whew!

de K6MBL

Offline lagomorphmom

  • Raccoon
  • *****
  • Posts: 1025
Re: No more Morse Code required for licenses
« Reply #9 on: Dec 17, 06, 03:48:11 PM »
It's about time!  If it weren't for the code requirements 30 years ago, I would have already been a HAM for all those years.   ;D

Ok, I gotta bust your chops on that one, Bob. I got mine in fall '91 after the no code rule change for technician class. Got my license just in time for Christmas back in the paper days. Lemme see, 2006-1991= 15, so I don't see how we we can give you a pass for more than 15 years, what do you guys think???

Offline Toolman

  • Raccoon
  • *****
  • Posts: 874
  • You can't fix stupid
Re: No more Morse Code required for licenses
« Reply #10 on: Dec 17, 06, 03:59:51 PM »
 I applaud those who now wish to upgrade their current license due to the element change. Being a VEC I received this information a week ago. You will enjoy the low bands as I have over the years. Making that first contact to a foreign country, collecting QSL cards from all over the world, working on getting a "WAS" in multiple band operation and single band operation completion and maybe a DXCC is fun stuff. I met a fellow Ham in Spokane one night after making contact with a station in Portugal. We spent nearly 5yrs after that on 14.155 three nights a week at 1800. HF is truly my favorite operation and use it in the truck as well.

 But I fail to see why those who wanted to get a techincian license waited until now ??? You could have done this 15yrs ago.

 When I worked on my Extra ticket the 20wpm test was a tad tougher after the 13wpm. I actually liked code operation spening a lot of time on 40mtrs. I machined all my own keys until switching to an electronic paddle. But after that 20wpm test, it just blew the wind out of my sails and I didn't like it much after that. It's too bad the code requirement put off so many people from achieving their license. I guess they didn't want it bad enough or intimidated by learning the code. The challange is what kept me going.

 Some of you may get a kick out of operating the digital modes of HF. A 100watts and a modest antenna works well. Mrs. Toolman enjoys this a lot.

 I prefer chasing DX in SSB with the tubes from the 1KW amp keeping me warm, fed into a yagi on the tower.


 Now, once you upgrade you can help keep HRO and AES in buisness as they are struggling.  :'(

 Have fun upgrading and maybe we'll bump into each other on the otherside. ;D

WB6K

CA5th

  • Guest
Re: No more Morse Code required for licenses
« Reply #11 on: Dec 20, 06, 12:30:56 AM »
See the Report and Order and Order on Reconsideration.

No code now just needs publication in the Federal Register.  Thirty days later the rules go into effect.

Go to http://www.arrl.org/ and follow the links for the full details.